HP Comware 5 Debug Manual Vol 1

DLSW_EB: LLC circuit timer with neighbor 000f.e21d.a5fb stop
*Mar 9 16:04:48:679 2011 Sysname DLSW/7/DLSw_EB:
DLSw_EB: Received UA frame from GigabitEthernet0/0
*Mar 9 16:04:48:779 2011 Sysname DLSW/7/DLSw_EB:
DLSw_EB: SABMESENT -> CONNECT
*Mar 9 16:04:48:930 2011 Sysname DLSW/7/DLSw_EB:
DLSw_EB: Sending DN frame from 00f0.47b8.a0dc to 00f0.47b8.a5df
*Mar 9 16:04:49:030 2011 Sysname DLSW/7/DLSw_EB:
DLSw_EB: Received MA frame from GigabitEthernet0/0
DLSw_EB: MASTER-PENDING -> MASTER
LLC2 debugging commands
debugging llc2
Use debugging llc2 to enable LLC2 debugging.
Use the undo debugging llcs command to disable LLC2 debugging.
Syntax
debugging llc2 { circuit [ circuit-index ] | error | packet }
undo debugging llc2 { circuit [ circuit-Index ] | error | packet }
Default
LLC2 debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
circuit: Debugging for LLC2 virtual circuit status.
circuit-index: Identifier of the LLC2 virtual circuit, in the range of 0 to 4294967295.
error: Debugging for error information of the LLC2 module.
packet: Debugging for packet contents of the LLC2 module (for U frames only).
Usage guidelines
Ta b l e 217 describes output fields and messages for the debugging llc2 circuit command.
Table 217 Output from the debugging llc2 circuit command
Field
Description
receive from: source
Origin of the LLC2 packet, which can be a remote
peer or a local interface.
I/S/U frame Packet type.
Ns =Ns, Nr =Nr Sequence number of packet received/sent.
404