HP Comware 5 Debug Manual Vol 1

*0.195190 Sysname LLC2/7/LLC2_CIR:
Nr = 0
*0.195590 Sysname LLC2/7/LLC2_CIR:
LLC2 FSM event: Receive an RR PDU(CMD&POLL)
LLC2 FSM action: SEND_RR_RSP(F=1)
// The output is the LLC2 debugging information output after the DLSw virtual circuit is successfully
established.
SDLC debugging commands
debugging sdlc
Use debugging sdlc to enable SDLC debugging.
Use undo debugging sdlc to disable SDLC debugging.
Syntax
debugging sdlc { all | event | packet } [interface interface-type interface-number ]
undo debugging sdlc { all | event | packet } [interface interface-type interface-number ]
Default
SDLC debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for the SDLC module, including event and packet debugging.
event: Debugging for events of the SDLC module.
packet: Debugging for packet contents of the SDLC module.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 220 describes output fields and messages for the debugging sdlc event command.
Table 220 Output from the debugging sdlc event command
Field
Description
interface-type interface-number (Output / Input)
The local interface on which the packet is sent
out/received and the packet direction.
SDLC PDU: frame type Packet type.
Frame head The first two bytes of the packet.
Event: event State machine event of the SDLC virtual circuit.
Event: action
Action taken by the SDLC virtual circuit state machine
for the event.
408