HP Comware 5 Debug Manual Vol 1

*Jul 28 16:44:07:985 2010 Spoke1 DVPN/7/EVENT:

Initialized session 10.0.1.1.

// DVPN initialized the session to peer 10.0.1.1.

*Jul 28 16:44:08:000 2010 Spoke1 DVPN/7/EVENT:

Created KEEPALIVE timer for session 10.0.1.1.

// DVPN started a keepalive timer for session 10 . 0 .1.1.

# Enable DVPN packet debugging. When a DVPN UDP tunnel is established, output similar to the

following example is generated:

<Spoke1> debugging dvpn packet

*Jul 28 16:39:11:579 2010 Spoke-2 DVPN/7/PACKET:

After encapsulation: from 202.10.19.74 to 202.10.19.73.

// DVPN sent a packet from 2 0 2.10 .19. 74 to 2 0 2.10 .19. 73 .

*Jul 28 16:39:11:579 2010 Spoke1 DVPN/7/PACKET:

Sent KEEPALIVE to peer 10.0.1.1.

// DVPN sent a keepalive packet to the device whose private address is 10.0.1.1.

*Jul 28 16:39:11:594 2010 Spoke1 DVPN/7/PACKET:

Received a DVPN UDP packet.

// DVPN received a DVPN UDP packet.

*Jul 28 16:39:11:610 2010 Spoke1 DVPN/7/PACKET:

Received a packet (type 3) from peer 10.0.1.1.

// DVPN received a packet of type 3 from 10 . 0 .1.1.

# Enable DVPN packet debugging. When a DVPN GRE tunnel is established, output similar to the

following example is generated:

<Hub-1> debugging dvpn packet