HP Comware 5 Debug Manual Vol 1

LDAP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging aaa-ldap
Use debugging aaa-ldap to enable LDAP debugging.
Use undo debugging aaa-ldap to disable LDAP debugging.
Syntax
debugging aaa-ldap { all | error | event | fsm }
undo debugging aaa-ldap { all | error | event | fsm }
Default
LDAP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for LDAP.
error: Specifies debugging for errors.
event: Specifies debugging for events.
fsm: Specifies debugging for state machine.
Usage guidelines
Ta b l e 15 describes output fields and messages for the debugging aaa-ldap error command.
Table 15 Output for the debugging aaa-ldap error command
Field
Description
Failed to connect with server (session
id=session-id, scheme id=scheme-id)
The device could not connect to the LDAP server specified in the
scheme because of an incorrect IP address or port number of the LDAP
server or an LDAP server failure.
44