HP Comware 5 Debug Manual Vol 1

Field
Description
Received invalid message
(type=message-type) in state
fsm-state-name
LDAP received an invalid message during authentication.
Message type:
• 0—AAA request.
• 1—LDAP response.
• 2—Timer timeout.
The fsm-state-name argument indicates the current status of the state
machine:
• AUTHEN_INIT.
• AUTHEN_ADMINBIND.
• AUTHEN_USRSEARCH.
• AUTHEN_USRBIND.
• AUTHOR_INIT.
• AUTHOR_ADMINBIND1.
• AUTHOR_USRSEARCH.
• AUTHOR_USRBIND.
• AUTHOR_ADMINBIND2.
• AUTHOR_GRPSEARCH.
No response from LDAP server
The LDAP server did not respond after the device sent an LDAP request
or established a connection with the LDAP server. The reason might be
an incorrect IP address or port number of the LDAP server is
configured in the LDAP scheme, or the LDAP server fails.
Failed to bind administrator
LDAP failed to bind the administrator due to an incorrect administrator
DN in the LDAP scheme.
Failed to search user
LDAP failed to find the user because an incorrect username was
entered or incorrect user parameters were configured in the LDAP
scheme.
Failed to bind user
LDAP failed to bind the user because an incorrect user password was
entered.
Length of user DN exceeded the
maximum
The length of user DN exceeded 255 characters.
Failed to get user's group attributes
LDAP failed to get user's group attributes because the user did not
belong to any group.
The second binding administrator
failed
The second binding of administrator failed because the administrator
DN configured in the LDAP scheme is wrong.
Failed to send
searchUserGroupRequest to server
LDAP failed to send searchUserGroupRequest to the server because of
an LDAP server failure or network congestion.
Failed to search user's groups
LDAP failed to search user's groups because the user did not belong to
any group.
The message type (type=msg-type)
unsupported
LDAP received an unsupported request. The msg-type argument can
be authentication, authorization or accounting.
LDAP supports only authentication and authorization in this software
version.
Failed to connect with LDAP server
LDAP failed to connect to the LDAP server because of an incorrect IP
address of the LDAP server configured in the LDAP scheme or
insufficient system resources.
45