HP Comware 5 Debug Manual Vol 1

SC debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging sc
Use debugging sc to enable debugging for the SC module.
Use undo debugging sc to disable debugging for the SC module.
Syntax
debugging sc { all | error | event }
undo debugging sc { all | error | event }
Default
Debugging for the SC module is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for the SC module.
error: Specifies debugging for SC errors.
event: Specifies debugging for SC events.
Usage guidelines
Tab l e 17 describes output fields and messages for the debugging sc event command.
Table 17 Output from the debugging sc event command
Field
Description
ulRequestType AAA request type.
ulLoginUserID Login user ID.
ulUserID AAA connection index.
ulPhyType Physical port type.
ulIpAddr IP address.
szCalledNumber Called number.
szCallingNumber Calling number.
szUserName Username.
szDomainName Domain name.
ulIfNetIndex Interface index.
51