HP Comware 5 Debug Manual Vol 1

Filed
Description
getting the context ID The ACFP client was getting the context ID of a policy.
getting/adding/deleting the rule
The ACFP client was getting, adding, or deleting a
rule from the server.
getting operation status of a rule
The ACFP client was getting the operation status of a
rule from the server.
Examples
# Enable ACFP client error debugging. When an interface without an IP address is selected on the ACFP
client configuration page, output similar to the following example is generated:
<Sysname> debugging acfp client error
*Mar 21 11:28:54:812 2008 Sysname ACFPC/7/DEBUG_ACFPC_ ERROR:
Failed to get IP address of local interface.
# Enable ACFP client detailed debugging. The output in this example was created when the following
conditions exist:
•
ACSEI client, ACFP client, SNMP client, and remote interface management are enabled on the
device.
•
ACSEI server, ACFP server, and SNMP agent features are disabled on the device specified as the
ACFP server.
<DeviceA> debugging acfp client error verbose
*Mar 21 11:28:54:812 2008 DeviceA ACFPC/7/DEBUG_ACFPC_ VERBOSE:
ACFP client is not ready.
debugging acfp server
Use debugging acfp server to enable ACFP server debugging.
Use undo debugging acfp server to disable ACFP server debugging.
Syntax
debugging acfp server { all | error | event | packet }
undo debugging acfp server { all | error | event | packet }
Default
ACFP server debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for ACFP server.
error: Specifies ACFP server error debugging.
event: Specifies ACFP server event debugging.
packet: Specifies ACFP server packet debugging.
58