HP Comware 5 Debug Manual Vol 1

ACSEI debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
ACSEI server debugging commands
debugging acsei server
Use debugging acsei server to enable ACSEI debugging.
Use undo debugging acsei server to disable ACSEI debugging.
Syntax
debugging acsei server { all | error | event | packet }
undo debugging acsei server { all | error | event | packet }
Default
ACSEI debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of ACSEI debugging.
error: Specifies ACSEI error debugging.
event: Specifies ACSEI event debugging.
packet: Specifies ACSEI packet debugging.
Usage guidelines
Table 22 describes output fields and messages for the debugging acsei server packet command
Table 22 Output from the debugging acsei server packet command
Field
Description
Interface: Interface Interface enabled with ACSEI client.
DstMac: DstMac Destination MAC address of the packet.
SrcMac: SrcMac Source MAC address of the packet.
FrameType: FrameType Frame type of the packet.
ProtocolType: ProtocolType Protocol type of the packet.
Reserved: Reserved Reserved bits of the packet protocol.
61