HP Comware 5 Debug Manual Vol 1

Views
User view
Default command level
1: Monitor level
Usage guidelines
See Table 30 and Table 31 for output fields and messages for the debugging command.
debugging ipv6 adjacent-table entry
Use debugging ipv6 adjacent-table entry to enable IPv6 adjacency entry debugging.
Use undo debugging ipv6 adjacent-table entry to disable IPv6 adjacency entry debugging.
Syntax
debugging ipv6 adjacent-table entry
undo debugging ipv6 adjacent-table entry
Default
IPv6 adjacency entry debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 30 describes output fields and messages for the debugging ipv6 adjacent-table entry command.
Table 30 Output from the debugging ipv6 adjacent-table entry command
Field Description
IPv6 Address Next hop address of the outgoing interface of the IPv6 adjacency table.
ulRouteIfIndex IPv6 routing interface.
ulPhyIfIndex IPv6 physical interface.
ulLogicIfIndex IPv6 logical interface.
ucServiceType
Service type of the adjacency entry, such as PPP and IP over ATM. Only PPP is
supported currently.
ucslot Slot number.
ucSynFlag Flag indicating whether the entry is synchronized.
ulVirtualCircuitInfo
Virtual link information of the IPv6 adjacency entry, such as PVC and DLCI. N/A
is displayed for the virtual link of ATM, because the adjacency table does not
support ATM.
ulMtu MTU value.
78