HP Comware 5 Debug Manual Vol 1

Examples
# Enable IPv6 adjacency entry debugging.
<Sysname> debugging ipv6 adjacent-table entry
*Jun 5 11:19:37:250 2007 Sysname ADJ6/7/Adj6_Entry_Add:
IPv6 Address : N/A
ulRouteIfIndex : Pos1/0 ulPhyfIndex : Pos1/0
ulLogicIfIndex : N/A ucServiceType : PPP
ucSlot : 1 ucSynFlag : Y
ulVirtualCircuitInfo : N/A ulMtu : 4478
// IPv6 adjacency table added an entry.
*Jun 5 11:19:21:890 2007 Sysname ADJ6/7/Adj6_Entry_Delete:
IPv6 Address : N/A
ulRouteIfIndex : Pos1/0 ulPhyfIndex : Pos1/0
ulLogicIfIndex : N/A ucServiceType : PPP
ucSlot : 1 ucSynFlag : Y
ulVirtualCircuitInfo : N/A ulMtu : 4478
// IPv6 adjacency table deleted an entry.
debugging ipv6 adjacent-table event
Use debugging ipv6 adjacent-table event to enable IPv6 adjacency table event debugging.
Use undo debugging ipv6 adjacent-table event to disable IPv6 adjacency table event debugging.
Syntax
debugging ipv6 adjacent-table event
undo debugging ipv6 adjacent-table event
Default
IPv6 adjacency table event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Ta b l e 31 describes output fields and messages for the debugging ipv6 adjacent-table event command.
Table 31 Output from the debugging ipv6 adjacent-table event command
Field Description
ADJ6 LinkUp Information Link–up event information.
ADJ6 LinkDown Information Link–down event information.
IPv6 Address
Next hop address of the outgoing interface of the IPv6 adjacency
table.
79