HP Comware 5 Debug Manual Vol 1

Field
Description
Failed to get the packet information, dropping packet. AFT failed to read the packet and dropped it.
The SessionInfo or AttachInfo does not exist, dropping
packet.
AFT dropped the packet because the SessionInfo or
AttachInfo field of the packet did not exist.
Invalid IPv4 address, dropping packet.
AFT dropped the packet because its IPv4 address was
invalid.
Unexpired source route option found. An ICMPv6
error generated.
Unexpired source route option was found, and an
ICMPv6 error message was generated.
Hop Limit exceeded! The hop limit of the packet was reached.
ICMPv6 fragment packet, dropping packet. AFT dropped the fragmented ICMPv6 packet.
Authentication header or Encapsulating Security
Payload header found.
Authentication header or Encapsulating Security
Payload header was found.
The first TCP packet is non-SYN, dropping packet.
AFT dropped the first TCP packet because it was not a
SYN packet.
Cannot get the mapped IPv4 source address,
dropping packet.
AFT dropped the packet because no mapped IPv4
source address was found.
Dropping an IPv4 fragment packet.
AFT dropped the IPv4 packet because it was a
fragment.
Cannot get the outgoing interface. An ICMPv4 error
generated.
Outgoing interface was not found, and an ICMPv4
error message was generated.
Option field error. Option field error was found.
Unexpired source route option found. An ICMPv4
error generated.
Unexpired source route option was found, and an
ICMPv4 error message was generated.
TTL exceeded! The hop limit of the packet was reached.
Cannot get the mapped IPv6 source address,
dropping packet.
AFT dropped the packet because no mapped IPv6
source address was found.
The mapped IPv6 source address does not contain a
configured prefix, dropping packet.
AFT dropped the packet because the mapped IPv6
source address did not contain a configured prefix.
Error occurred during ALG processing for IPv6 packet. Error occurred during ALG processing an IPv6 packet.
Error occurred during ALG processing for IPv4 packet. Error occurred during ALG processing an IPv4 packet.
Error occurred during creating V6 header and
calculating checksum.
Error occurred during creating an IPv6 header and
calculating checksum.
Table 36 describes output fields and messages for the debugging aft packet command.
Table 36 Output from the debugging aft packet command (only for multi-core devices)
Field
Description
Pro Protocol number of the packet.
TTL TTL value.
85