R3303-About the HP HSR6800 Configuration Guides

ManualsBrandsHP ManualsNetwork HardwareHP HSR68xx Configure-to-Order Router Solution

About the HP HSR6800 Routers Configuration

Guides

The HP HSR6800 configuration guides are part of the HP HSR6800 documentation set. They describe

the software features for the HP HSR6800, and guide you through the software configuration procedures.

These configuration guides also provide configuration examples to help you apply the software features

to different network scenarios. The HP HSR6800 documentation set includes 13 configuration guides:

Confi

uration

uide Content

Fundamentals Configuration Guide

Describes how to use the command line interface of the switch, log in to

and set up the switch, and use the basic management functions. This

guide includes:

• CLI

• Logging In to the Router

• FTP and TFTP

• File Management

• Configuration File Management

• Software Upgrade

• Device Management

Interface Configuration Guide

Covers the configuration of various interfaces. This guide includes:

• Ethernet Interface

• ATM Interface

• WAN Interfaces

• POS Interface

• CPOS Interface

• E-CPOS Interface

• Loopback and Null Interfaces

Layer 2 – LAN Switching

Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched

network, such as VLAN technology, port isolation, MSTP. You can use

these features to divide broadcast domains, remove Layer 2 loops,

isolate users within a VLAN, re-mark VLAN tags, implement VLAN VPNs

over the Internet, and so on. This guide includes:

• MAC Address Table

• Ethernet Link Aggregation

• Port Isolation

• MSTP

• BPDU Tunneling

• VLAN

• GVRP

• QinQ

• VLAN Termination

• VLAN Mapping

• LLDP

Layer 2 – WAN Access

Configuration Guide

Covers WAN access technologies. This guide includes:

• ATM

Summary of content (5 pages)

PAGE 1
About the HP HSR6800 Routers Configuration Guides The HP HSR6800 configuration guides are part of the HP HSR6800 documentation set. They describe the software features for the HP HSR6800, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.
PAGE 2
Configuration guide Content • PPP • L2TP • HDLC • Frame Relay • Modem Management Describes IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
PAGE 3
Configuration guide Content Covers Layer 3 IPv4 multicast protocols IGMP, PIM, MBGP, and Layer 3 IPv6 multicast protocols MLD, IPv6 PIM, MSDP, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP snooping, and multicast VLAN), and Layer 2 IPv6 multicast protocols (MLD snooping and IPv6 multicast VLAN).
PAGE 4
Configuration guide Content • User Profile • Password Control • RSH • Public Key • PKI • IPsec • SSH2.0 • Firewall • ALG • Session Management • Connection Limit • Web Filtering • Attack Detection and Protection • TCP and ICMP Attack Protection • IP Source Guard • ARP Attack Protection • ND Attack Defense • URPF • FIPS Describes high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation.
PAGE 5
Configuration guide IRF Configuration Guide Acronyms Content • NetStream • IPv6 NetStream • Information Center • Flow Logging • sFlow • Gateway Mode • Host-Monitor Covers IRF technologies. This guide includes: • IRF Lists the significant acronyms in the configuration guides.