R3303-HP HSR6800 Routers Interface Command Reference

99
clock (CT1 interface)
Use clock to configure clock source for the CT1 interface.
Use undo clock to restore the default.
Syntax
clock { master | slave }
undo clock
Default
The clock mode is line clock (slave).
Views
CT1 interface view
Default command level
2: System level
Parameters
master: Adopts the internal clock as the clock source.
slave: Adopts the line clock as the clock source.
Usage guidelines
When the CT1 interface is working as DCE, choose the internal clock for it. When it is working as DTE,
choose the line clock for it.
Examples
# Use the internal clock as the clock source on CT1 interface T1 2/0/0.
<Sysname> system-view
[Sysname] controller t1 2/0/0
[Sysname-T1 2/0/0] clock master
code (CT1 interface)
Use code to set the line code format for a CT1 interface.
Use undo code to restore the default.
Syntax
code { ami | b8zs }
undo code
Default
The line code format for a CT1 interface is B8ZS.
Views
CT1 interface view
Default command level
2: System level