R3303-HP HSR6800 Routers Interface Command Reference

2
Views
Ethernet interface view (combo interface)
Default command level
2: System level
Parameters
copper: Activates the copper(electrical) combo port.
fiber: Activates the fiber (optical) combo port.
Usage guidelines
Combo interfaces are logical interfaces. A combo interface comprises one fiber combo port and one
copper combo port. The two ports cannot work simultaneously. If one port is enabled, the other port is
automatically disabled.
Examples
# Activate the copper combo port of combo interface GigabitEthernet 5/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 5/0/1
[Sysname-GigabitEthernet5/0/1] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 5/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 5/0/1
[Sysname-GigabitEthernet5/0/1] combo enable fiber
description
Use description to change the description of the interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The default description of an interface is the interface name plus Interface. For example, GigabitEthernet
4/0/1 Interface.
Views
Ethernet interface view, Layer 3 Ethernet subinterface view
Default command level
2: System level
Parameters
text: Specifies the interface description, a string of 1 to 240 characters. The string can include
case-sensitive letters, digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound
sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace({), right
brace (}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<),
right angle bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back