R3303-HP HSR6800 Routers Interface Command Reference

107
Default
FDL is disabled (none).
Views
CT1 interface view
Default command level
2: System level
Parameters
ansi: Adopts ANSI T1.403 for facilities data link (FDL).
att: Adopts AT&T TR 54016 for FDL.
both: Adopts both ANSI T1.403 and AT&T TR 54016 for FDL.
none: Disables FDL.
Usage guidelines
FDL is an embedded 4 kbps overhead channel within the ESF format for transmitting performance
statistics or loopback code.
Examples
# Implement AT&T TR 54016 FDL on interface T1 2/0/0.
<Sysname> system-view
[Sysname] controller t1 2/0/0
[Sysname-T1 2/0/0] fdl att
frame-format (CT1 interface)
Use frame-format to set the framing format on a CT1 interface.
Use undo frame-format to restore the default.
Syntax
frame-format { esf | sf }
undo frame-format
Default
The framing format on a CT1 interface is esf
Views
CT1 interface view
Default command level
2: System level
Parameters
esf: Sets the framing format to extended super frame (ESF).
sf: Sets the framing format to super frame (SF).