R3303-HP HSR6800 Routers Interface Command Reference

123
Views
E1-F interface view
Default command level
2: System level
Parameters
list: Specifies timeslots to be bundled. They are numbered 1 through 31. You may specify a single timeslot
by specifying its number, a range of timeslots by specifying a range in the form of number1-number2, or
several discrete timeslots by specifying number1, number2-number3.
Usage guidelines
Timeslot bundling results in interface rate change. For example, after you bundle timeslots 1 through 10
on the interface, the interface rate becomes 10 × 64 kbps.
Only one channel set can be created on an E1-F interface, and this channel set is associated with the
current synchronous serial interface. On a CE1 interface, however, you may create multiple channel sets;
for each of them, the system automatically creates a synchronous serial interface.
Timeslot 0 on E1-F interfaces is used for transmitting synchronization information. A bundling operation
only involves timeslots 1 through 31.
When the E1-F interface is working in unframed mode, the fe1 timeslot-list command is invalid.
Examples
# Bundle timeslots 1, 2, 5, 10 through 15, and 18 on E1-F interface Serial 2/0/0.
<Sysname> system-view
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] fe1 timeslot-list 1,2,5,10-15,18
Related commands
fe1 unframed
fe1 unframed
Use fe1 unframed to configure the E1-F interface to operate in unframed mode.
Use undo fe1 unframed to configure the E1-F interface to operate in framed mode.
Syntax
fe1 unframed
undo fe1 unframed
Default
The E1-F interface operates in framed mode.
Views
E1-F interface view
Default command level
2: System level