R3303-HP HSR6800 Routers Interface Command Reference

181
POS interface configuration commands
bandwidth
Use bandwidth to set the intended bandwidth for the POS interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
POS interface view
Default command level
2: System level
Parameters
bandwidth-value: Intended bandwidth for the POS interface, in the range of 1 to 4,294,967,295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The intended bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for interface POS 3/1/1.
<Sysname> system-view
[Sysname] interface pos 3/1/1
[Sysname-Pos3/1/1] bandwidth 1000
clock
Use clock to set the clock mode of the POS interface.
Use undo clock to restore the default.
Syntax
clock { master | slave }
undo clock
Default
The clock mode is slave.
Views
POS interface view