R3303-HP HSR6800 Routers Interface Command Reference

188
Netmask request: 0
Netmask reply: 0
Unknown type: 0
display ipv6 interface pos
Use display ip interface pos to display IPv6 configuration and status information for a specific POS
interface.
Syntax
display ipv6 interface pos [ interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Specifies a POS interface by its number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the IPv6 configuration and status information of interface POS 2/1/0.
<Sysname> display ipv6 interface pos 2/1/0
Pos2/1/0 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::40EE:AF0:801
Global unicast address(es):
21::2, subnet is 21::/64 [TENTATIVE]
Joined group address(es):
FF02::1:FF00:0
FF02::1:FF00:2
FF02::1:FFF0:801
FF02::2
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 0