R3303-HP HSR6800 Routers Interface Command Reference

191
Views
POS interface view
Default command level
2: System level
Examples
# Ignore CRC of the J1 byte on interface POS 4/1/1.
<Sysname> system-view
[Sysname] interface pos 4/1/1
[Sysname-Pos4/1/1] flag j1 ignore
frame-format
Use frame-format to configure framing on the POS interface.
Use undo frame-format to restore the default.
Syntax
frame-format { sdh | sonet }
undo frame-format
Default
The framing format is SDH.
Views
POS interface view
Default command level
2: System level
Parameters
sdh: Sets framing format to synchronous digital hierarchy (SDH).
sonet: Sets framing format to synchronous optical network (SONET).
Examples
# Set the framing format on interface POS 2/1/1 to SDH.
<Sysname> system-view
[Sysname] interface pos 2/1/1
[Sysname-Pos2/1/1] frame-format sdh
link-delay
Use link-delay to set the link state change suppression interval on a POS interface.
Use undo link-delay to restore the default.
Syntax
link-delay seconds
undo link-delay