R3303-HP HSR6800 Routers Interface Command Reference

212
Default
C2 is 0x02 and J2 is cyclic null.
Views
CPOS interface view
Default command level
2: System level
Parameters
e1-number: E1 channel number, in the range of 1 to 63.
c2: Specifies the low-order channel signal tag byte (C2).
c2-value: Low-order channel signal flag byte (C2) to be set, 1 byte in length and in the range of 0x0 to
0x7.
j2: Specifies the low-order channel trace byte (J2).
sdh: Specifies the trace byte in SDH format.
sonet: Specifies the trace byte in SONET format.
j2-string: Low-order channel trace byte to be set, a string of 1 to 15 characters (in SDH format) or of 1 to
62 characters (in SONET format).
Examples
# Set C2 to 0x7 for the E1 channel numbered 3 of interface CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] e1 3 set flag c2 7
e1 set frame-format
Use e1 set frame-format to set the framing format of an E1 channel.
Use undo e1 set frame-format to restore the default.
Syntax
e1 e1-number set frame-format { crc4 | no-crc4 }
undo e1 e1-number set frame-format
Default
The framing format of an E1 channel is no-CRC4.
Views
CPOS interface view
Default command level
2: System level
Parameters
e1-number: Number of an E1 channel on the CPOS interface, in the range of 1 to 63.
crc4: Sets the framing format to CRC4.