R3303-HP HSR6800 Routers Interface Command Reference

217
e3 set national-bit
Use e3 set national-bit to set the national bit used on the specified E3 channel.
Use undo e3 set national-bit to restore the default.
Syntax
e3 e3-number set national-bit { 0 | 1 }
undo e3 e3-number set national-bit
Default
The national bit of an E3 channel is 1.
Views
CPOS interface view
Default command level
2: System level
Parameters
e3-number: Number of an E3 channel on the current CPOS interface, in the range of 1 to 3.
0: Sets the national bit to 0 for national communication.
1: Sets the national bit to 1 for international communication.
Examples
# Set the national bit of E3 channel 1 on interface CPOS 2/0/0 to 1.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] e3 1 set national-bit 1
e3 shutdown
Use e3 shutdown to shut down the specified E3 channel.
Use undo e3 shutdown to bring up the specified E3 channel.
Syntax
e3 e3-number shutdown
undo e3 e3-number shutdown
Default
An E3 channel is up.
Views
CPOS interface view
Default command level
2: System level
Parameters
e3-number: Number of an E3 channel on the current CPOS interface, in the range of 1 to 3.