R3303-HP HSR6800 Routers Interface Command Reference

227
[Sysname-Cpos1/0/0] quit
[Sysname] interface serial 1/0/0/1:1
[Sysname-Serial1/0/0/1:1] ppp mp soft-binding
reset counters controller cpos
Use reset counters controller cpos to clear the controller counter of a CPOS interface.
Syntax
reset counters controller cpos interface-number
Views
User view
Default command level
2: System level
Parameters
interface-number: Interface number.
Usage guidelines
You can use the display controller cpos command to display the controller counter.
The reset counters interface command clears the controller counters of all interfaces. To clear the
controller counters of individual CPOS interfaces, use the reset counters controller cpos command.
Examples
# Clear the controller counter of CPOS 2/0/0.
<Sysname> reset counters controller cpos 2/0/0
shutdown
Use shutdown to shut down the CPOS physical interface.
Use undo shutdown to bring up the CPOS physical interface.
Syntax
shutdown
undo shutdown
Default
The CPOS physical interface is up.
Views
CPOS interface view
Default command level
2: System level
Usage guidelines
The shutdown command on the CPOS physical interface shuts down all E1/T1 channels and serial
interfaces formed by timeslot bundles. They stop transmitting and receiving data as a result. To bring up
them, use the undo shutdown command on the CPOS physical interface.