R3303-HP HSR6800 Routers Interface Command Reference

250
oc-3
Use oc-3 to create a 155 Mbps channel with the specified number in the view of a 622 Mbps E-CPOS
interface or channel and enter the view of the 155 Mbps channel. If the specified 155 Mbps channel
already exists, you enter the view of the 155 Mbps channel directly.
Use undo oc-3 to remove the specified 155 Mbps channel and its subchannels.
Syntax
oc-3 oc-3-number
undo oc-3 oc-3-number
Views
622 Mbps E-CPOS interface view, OC-12 view
Default command level
2: System level
Parameters
oc-3-number: Number of a 155 Mbps channel, in the range of 1 to 4.
Examples
# Create the 155 Mbps channel OC-3 1 on the 622 Mbps channel OC-12 2 on 2.5 Gbps E-CPOS
interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-12 2
[Sysname-E-Cpos2/0/0-oc-12-2] oc-3 1
# Create 155 Mbps channel OC-3 2 on 622 Mbps E-CPOS interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-3 2
[Sysname-E-Cpos2/0/0-oc-3-2]
shutdown
Use shutdown to shut down the current E-CPOS interface.
Use undo shutdown to bring up the current E-CPOS interface.
Syntax
shutdown
undo shutdown
Default
An E-CPOS physical interface is up.
Views
E-CPOS interface view