R3303-HP HSR6800 Routers Interface Command Reference

252
using { oc-12 | oc-12c }
Use using oc-12 to configure the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in
channelized mode, where you can configure 155 Mbps channels.
Use using oc-12c to configure the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in
concatenated mode, where you can create one 622 Mbps POS channel.
Use undo using to restore the default operation mode of the E-CPOS interface or channel.
Syntax
using { oc-12 | oc-12c }
undo using
Default
A 622 Mbps E-CPOS interface or channel operates in channelized mode.
Views
622 Mbps E-CPOS interface view, OC-12 view
Default command level
2: System level
Parameters
oc-12: Configures the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in channelized
mode.
oc-12c: Configures the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in concatenated
mode.
Examples
# Configure the 622 Mbps interface E-CPOS 2/0/0 to operate in concatenated mode.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] using oc-12c
# Create 622 Mbps channel OC-12 1 on 2.5 Gbps E-CPOS interface E-CPOS 2/0/0, and configure
OC-12 1 to operate in concatenated mode.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-12 1
[Sysname-E-Cpos2/0/0-oc-12-1] using oc-12c
using { oc-3 | oc-3c }
Use using oc-3 to configure the 155 Mbps E-CPOS interface or channel to operate in channelized mode,
where you can configure E3/T3 channels.
Use using oc-3c to configure the 155 Mbps E-CPOS interface or channel to operate in concatenated
mode, where you can create one 155 Mbps POS channel.
Use undo using to restore the default operation mode of the E-CPOS interface or channel.