R3303-HP HSR6800 Routers Interface Command Reference

64
Default
The description of a WAN interface is interface name Interface, for example, Serial1/2/0 Interface.
Views
Serial interface view, E1-F interface view, T1-F interface view, CE3 interface view, CT3 interface view,
CE1 interface view, CT1 interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive character string of 1 to 240 characters. The string can include
case-sensitive letters, digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound
sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace({), right
brace (}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<),
right angle bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/),
spaces, and other Unicode characters and symbols.
Examples
# Set the description for serial interface Serial 1/2/0 to router-interface.
<Sysname> system-view
[Sysname] interface serial 1/2/0
[Sysname-Serial1/2/0] description router-interface
link-delay
Use link-delay to set the physical state change suppression time on an interface.
Use undo link-delay to restore the default.
Syntax
link-delay delay-time
undo link-delay
Default
Physical state change suppression is disabled.
Views
CE3 interface view, CT3 interface view, CE1 interface view, CT1 interface view
Default command level
2: System level
Usage guidelines
If you set the physical state change suppression time, an interface can become up or down only after the
time is reached.
Examples
# Set the physical state change suppression time on the CE 1 interface to 8 seconds.
<Sysname> system-view
[Sysname] controller e1 2/0/0