R3303-HP HSR6800 Routers Interface Command Reference

65
[Sysname-E1 2/0/0] link-delay 8
shutdown
Use shutdown to shut down an interface.
Use undo shutdown to bring up an interface.
Syntax
shutdown
undo shutdown
Default
A WAN interface is up.
Views
Serial interface view, E1-F interface view, T1-F interface view, CE3 interface view, CT3 interface view,
CE1 interface view, CT1 interface view
Default command level
2: System level
Usage guidelines
When you modify parameters on a WAN interface, execute the shutdown command, and then the undo
shutdown command to make your modifications take effect.
Examples
# Shut down serial interface Serial 1/2/0.
<Sysname> system-view
[Sysname] interface serial 1/2/0
[Sysname-Serial1/2/0] shutdown
Serial interface configuration commands
baudrate
Use baudrate to set the baud rate for a serial interface.
Use undo baudrate to restore the default.
Syntax
baudrate baudrate
undo baudrate
Default
The baud rate is 64,000 bps on a synchronous serial interface.
Views
Synchronous serial interface view