R3303-HP HSR6800 Routers Interface Command Reference

75
Default
Receive-clock signal inversion is disabled on DTE-side synchronous serial interfaces.
Views
Synchronous serial interface view
Default command level
2: System level
Usage guidelines
Sometimes, you may need to invert the receive-clock signal on a DTE-side serial interface to eliminate the
half clock-period delay on the line. This command is necessary only for some special DCE devices. In
common applications, do not invert the clock.
Examples
# Invert the receive-clock on DTE-side synchronous serial interface 1/0/0.
<Sysname> system-view
[Sysname] interface serial 1/0/0
[Sysname-Serial1/0/0] invert receive-clock
Related commands
• invert transmit-clock
• clock
invert transmit-clock
Use invert transmit-clock to invert the transmit-clock signal on the DTE-side synchronous serial interface.
Use undo invert transmit-clock to restore the default.
Syntax
invert transmit-clock
undo invert transmit-clock
Default
Transmit-clock signal inversion is disabled on DTE-side synchronous serial interfaces.
Views
Serial interface view
Default command level
2: System level
Usage guidelines
Sometimes, you may need to invert the receive-clock signal on a DTE-side serial interface to eliminate the
half clock-period delay on the line. This command is necessary only for some special DCE devices. In
common applications, do not invert the clock.
Examples
# Invert the transmit-clock on DTE-side synchronous serial interface 1/0/0.
<Sysname> system-view
[Sysname] interface serial 1/0/0