R3303-HP HSR6800 Routers Interface Command Reference

82
Syntax
cable { long | short }
undo cable
Default
The long keyword applies.
Views
CE1 interface view
Default command level
2: System level
Parameters
long: Indicates that the attenuation of receiver is –43 dB.
short: Indicates that the attenuation of receiver is –10 dB.
Examples
# Set the cable length matching CE1 interface E1 2/0/0 to short.
<Sysname> system-view
[Sysname] controller e1 2/0/0
[Sysname-E1 2/0/0] cable short
channel-set (CE1 interface)
Use channel-set to bundle timeslots on the CE1 interface into a channel-set.
Use undo channel-set to cancel the bundling.
Syntax
channel-set set-number timeslot-list list
undo channel-set [ set-number ]
Default
No timeslots are bundled into channel sets.
Views
CE1 interface view
Default command level
2: System level
Parameters
set-number: The number of the channel set formed by bundling timeslots on the interface, in the range of
0 to 30.
timeslot-list list: Specifies the timeslots to be bundled. The list argument can contain multiple timeslot
numbers, each of which is in the range of 1 to 31. You can specify a single timeslot by specifying a
timeslot number, a range of timeslots by providing this argument in the form of { number1-number2 }, or
multiple timeslots by providing this argument in the form of { number1, number2-number3 }.