R3303-HP HSR6800 Routers Interface Command Reference

88
Syntax
display controller e1 [ interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Interface number. In conjunction with the e1 keyword, it specifies a CE1 interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about interface E1 2/0/0.
<Sysname> display controller e1 2/0/0
E1 2/0/0 current state: UP
Description : E1 2/0/0 Interface
Basic Configuration:
Work mode is E1 framed, Cable type is 75 Ohm unbalanced.
Frame-format is no-crc4.
Line code is hdb3, Source clock is slave.
Idle code is 7e, Itf type is 7e, Itf number is 4.
Loop back is not set.
Alarm State:
Receiver alarm state is None.
Historical Statistics:
Last clearing of counters: Never
Data in current interval (150 seconds elapsed):
0 Loss Frame Alignment Secs, 0 Framing Error Secs,
0 CRC Error Secs, 0 Alarm Indication Secs, 0 Loss-of-signals Secs,
0 Code Violations Secs, 0 Slip Secs, 0 E-Bit error Secs.
Table 17 Command output
Field Description
E1 2/0/0 current state: UP State of the interface.
Description : E1 2/0/0 Interface Description of the interface.
Work mode Work mode of the interface: E1 or CE1.
Cable type Cable type of the interface.
Frame-format Frame format of the interface: CRC4 or non-CRC4.