R3303-HP HSR6800 Routers Interface Command Reference

90
Usage guidelines
The value of renew-timer must be at least four times detect-timer. If the number of error packets received
during detect-timer is less than 100, they will be ignored by the system.
This command applies to CT1 interfaces, CE1 interfaces, E1-F interfaces, and T1-F interfaces only.
Examples
# Set the detect-timer to 100 seconds, renew-timer to 2400 seconds, and threshold to 15%.
<Sysname> system-view
[Sysname] error-diffusion restraint config 100 2400 15
error-diffusion restraint enable
Use error-diffusion restraint enable to enable error packets diffusion restraint.
Use undo error-diffusion restraint enable to disable this function.
Syntax
error-diffusion restraint enable
undo error-diffusion restraint enable
Default
Error packets diffusion restraint is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
This command applies to CT1 interfaces, CE1 interfaces, E1-F interfaces, and T1-F interfaces only.
Examples
# Enable error packets diffusion restraint.
<Sysname> system-view
[Sysname] error-diffusion restraint enable
frame-format (CE1 interface)
Use frame-format to set the framing format on the CE1 interface.
Use undo frame-format to restore the default.
Syntax
frame-format { crc4 | no-crc4 }
undo frame-format
Default
The framing format on a CE1 interface is no-CRC4.