R3303-HP HSR6800 Routers IRF Configuration Guide

18
Figure 11 A network that comprises two IRF domains
To assign a domain ID to an IRF fabric:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Assign a domain ID to the
IRF fabric.
irf domain domain-id By default, the domain ID of an IRF fabric is 0.
Changing the member ID of a device
CAUTION:
In IRF mode, an IRF member ID change can invalidate member ID-related settin
g
s and cause data loss. Be
sure you fully understand its impact on your live network.
The new member ID takes effect at reboot. After the device reboots, the settings on all member ID related
physical resources (including common physical network ports) are removed and require reconfiguration,
regardless of whether you have saved the configuration.
To change the member ID of a member device:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Change the member ID of a
member device.
irf member member-id renumber
new-member-id
N/A