R3303-HP HSR6800 Routers IRF Configuration Guide

20
Ste
p
Command Remarks
2. Enter Ethernet interface view
or interface range view.
• Enter interface range view:
{ Method 1:
interface range { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
{ Method 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
• Enter interface view:
interface interface-type
interface-number
To shut down a range of physical
IRF ports, enter interface range
view.
To shut down one physical IRF
port, enter its interface view.
3. Shut down the port or ports.
shutdown N/A
4. Return to system view.
quit N/A
5. Create an IRF port and enter
IRF port view.
irf-port member-id/port-number N/A
6. Bind each physical port to
the IRF port.
port group interface interface-type
interface-number [ mode { enhanced |
normal } ]
By default, no physical ports are
bound to any IRF port.
Repeat this step to assign
multiple physical ports to the IRF
port for link redundancy.
7. Return to system view.
quit N/A
8. Enter physical IRF port view
or interface range view.
• Enter interface range view:
{ Method 1:
interface range { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
{ Method 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
• Enter interface view:
interface interface-type
interface-number
N/A
9. Bring up the port or ports.
undo shutdown N/A
10. Return to system view.
quit N/A
Enabling IRF auto merge
When two IRF fabrics merge, you must reboot the member devices in the IRF fabric that fails in the master
election. The auto merge function enables the IRF fabric to automatically reboot all its member devices to
complete the merge.