R3303-HP HSR6800 Routers IRF Configuration Guide

[Sysname] interface vlan-interface 3

[Sysname-Vlan-interface3] mad arp enable

You need to assign a domain ID (range: 0-4294967295)

[Current domain is: 1]:

The assigned domain ID is: 1

[Sysname-Vlan-interface3] ip address 192.168.2.1 24

4. Configure Router C as the intermediate device:

CAUTION:

If the intermediate device is also in an IRF fabric, assign the two IRF fabrics different domain IDs for

correct split detection.

# Enable the spanning tree feature globally on Router C.

<DeviceC> system-view

[DeviceC] stp enable

# Create VLAN 3, and add GigabitEthernet 4/0/1 and GigabitEthernet 4/0/2 to VLAN 3.

[DeviceC] vlan 3

[DeviceC-vlan3] port gigabitethernet 4/0/1 gigabitethernet 4/0/2

[DeviceC-vlan3] quit

Restoring standalone mode

Network requirements

Dismantle the IRF fabric in Figure 17 and change the operating mode of Router A and Router B from IRF

to standalone.

Figure 17 Network diagram

Configuration procedure

1. Identify the master.

<IRF> display irf

MemberID Slot Role Priority CPU-Mac Description

*+1 0 Master 1 000f-e200-0600 RouterA