R3303-HP HSR6800 Routers IRF Configuration Guide

The device will switch to stand-alone mode and reboot. You are recommended to save

the current running configuration and specify the configuration file for the next

startup. Continue? [Y/N]:y

Do you want to convert the content of the next startup configuration file

flash:/vrpcfg.cfg to make it available in stand-alone mode? [Y/N]:y

Please wait.............

Saving the converted configuration file to main board succeeded.

Chassis 2 Slot 1:

Saving the converted configuration file succeeded.

Now rebooting, please wait...

Router B automatically reboots to complete the operating mode change.

7. If you have configured a VLAN interface on the IRF fabric for a VLAN that has member ports on

both member devices, change the IP address for the VLAN interface on one device to avoid an IP

address collision.