R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR68xx Configure-to-Order Router Solution

100

[LAC] local-user vpdn1

[LAC-luser-vpdn1] password simple 11111

[LAC-luser-vpdn1] service-type ppp

[LAC-luser-vpdn1] quit

[LAC] local-user vpdn2

[LAC-luser-vpdn2] password simple 22222

[LAC-luser-vpdn2] service-type ppp

[LAC-luser-vpdn2] quit

# Configure local authentication for the users.

[LAC] domain aaa.net

[LAC-isp-aaa.net] authentication ppp local

[LAC-isp-aaa.net] quit

[LAC] domain bbb.net

[LAC-isp-bbb.net] authentication ppp local

[LAC-isp-bbb.net] quit

# Configure PPPoE servers on interfaces GigabitEthernet 1/0/1 and GigabitEthernet 1/0/3.

[LAC] interface gigabitethernet 1/0/3

[LAC-GigabitEthernet1/0/3] pppoe-server bind virtual-template 100

[LAC-GigabitEthernet1/0/3] quit

[LAC] interface gigabitethernet 1/0/1

[LAC-GigabitEthernet1/0/1] pppoe-server bind virtual-template 101

[LAC-GigabitEthernet1/0/1] quit

# Configure an IP address for interface GigabitEthernet 1/0/2.

[LAC] interface gigabitethernet 1/0/2

[LAC-GigabitEthernet1/0/2] ip address 1.1.2.1 255.255.255.0

[LAC-GigabitEthernet1/0/2] quit

# Create the VT interfaces and configure CHAP authentication on them.

[LAC] interface virtual-template 100

[LAC-Virtual-Template100] ppp authentication-mode chap domain aaa.net

[LAC-Virtual-Template100] quit

[LAC] interface virtual-template 101

[LAC-Virtual-Template101] ppp authentication-mode chap domain bbb.net

[LAC-Virtual-Template101] quit

# Create two L2TP groups and configure the related attributes.

[LAC] l2tp enable

[LAC] l2tp-group 1

[LAC-l2tp1] tunnel name LAC-1

[LAC-l2tp1] start l2tp ip 1.1.2.2 domain aaa.net

[LAC-l2tp1] quit

[LAC] l2tp-group 2

[LAC-l2tp2] tunnel name LAC-1

[LAC-l2tp2] start l2tp ip 1.1.2.2 domain bbb.net

# Enable the tunnel authentication and specify a tunnel authentication key.

[LAC-l2tp2] tunnel authentication

[LAC-l2tp2] tunnel password simple 12345

[LAC-l2tp2] quit

[LAC] l2tp-group 1