R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

108
Ste
p
Command Remarks
5. Set the bundling priority for
the member interface
bundle member-priority priority
Optional.
32768 by default.
Displaying and maintaining HDLC link bundling
Task Command Remarks
Display information about an
HDLC link bundle.
display bundle member hdlc-bundle
[ bundle-id ] [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about an
HDLC link bundle interface.
• display interface hdlc-bundle
bundle-id [ brief [ description ] ]
[ | { begin | exclude | include }
regular-expression ]
• display interface [ hdlc-bundle ]
[ brief [ down ] ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Clear statistics for an HDLC link
bundle interface.
reset counters interface [ hdlc-bundle
[ bundle-id ] ]
Available in user view.
HDLC link bundling configuration example
Network requirements
As shown in Figure 33, create an HDLC link bundle to increase bandwidth and enhance connection
reliability between Router A and Router B.
Figure 33 Network diagram
Configuration procedure
1. Configure Router A:
# Create HDLC link bundle interface 1 and assign an IP address for it.
<RouterA> system-view
[RouterA] interface hdlc-bundle 1