R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

120
Task Command Remarks
Display frame relay protocol
status on an interface.
display interface mfr { interface-number |
interface-number.subnumber } [ brief ] [ |
{ begin | exclude | include }
regular-expression ]
display interface [ mfr ] [ brief [ down ] ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display the mapping table of
protocol address and frame
relay address.
display fr map-info [ interface
interface-type { interface-number |
interface-number.subnumber } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display receiving/sending
statistics of frame relay LMI type
messages.
display fr lmi-info [ interface
interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display incoming and outgoing
frame relay data statistics.
display fr statistics [ interface
interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display frame relay permanent
virtual circuit table.
display fr pvc-info [ interface
interface-type { interface-number |
interface-number.subnumber } ]
[ dlci-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display statistics of frame relay
InARP messages.
display fr inarp-info [ interface
interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the information of
configured frame relay
switching.
display fr dlci-switch [ interface
interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear all automatically
established frame relay address
mappings.
reset fr inarp Available in user view.
Clear the statistics for an FR
PVC.
reset fr pvc interface serial
interface-number [ dlci dlci-number ]
Available in user view.
Frame relay configuration examples
Connecting LANs through a frame relay network
Network requirements
As shown in Figure 37, connect LANs through a public frame relay network. The routers can only operate
as DTE.