R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

127
Ste
p
Command Remarks
4. Configure the MFR bundle
link identifier.
mfr link-name [ name ]
Optional.
By default, the name of the current
interface is used.
5. Configure the hello message
sending interval for the MFR
bundle link.
mfr timer hello seconds
Optional.
The default setting is 10 seconds.
6. Configure the waiting time
before the MFR bundle link
resends hello messages.
mfr timer ack seconds
Optional.
The default setting is 4 seconds.
7. Configure the maximum
times that the MFR bundle
link can resend hello
messages.
mfr retry number
Optional.
The default setting is 2.
Displaying and maintaining multilink frame relay
Task Command Remarks
Display configuration and
status of an MFR interface.
display interface mfr { interface-number |
interface-number.subnumber } [ brief
[ description ] ] [ | { begin | exclude |
include } regular-expression ]
display interface [ mfr ] [ brief [ down ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display configuration and
statistics of an MFR bundle
and bundle links.
display mfr [ interface interface-type
interface-number | verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Clear statistics of MFR
interfaces.
reset counters interface [ mfr
[ interface-number |
interface-number.subnumber ] ]
Available in user view.
Multilink frame relay configuration examples
MFR direct connection configuration example
Network requirements
As shown in 错误！未找到引用源。, Router A and Router B are directly connected through Serial 2/0/1
and Serial 2/0/2. The frame relay protocol bundles the two serial ports to provide broader bandwidth.