R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

[RouterB] interface serial 2/0/2

[RouterB-Serial2/0/2] link-protocol ppp

[RouterB-Serial2/0/2] ppp authentication-mode pap domain system

[RouterB-Serial2/0/2] ppp pap local-user rtb password simple rtb

[RouterB-Serial2/0/2] ppp mp

[RouterB-Serial2/0/2] shutdown

[RouterB-Serial2/0/2] undo shutdown

[RouterB-Serial2/0/2] quit

# Configure Serial 2/0/1.

[RouterB] interface serial 2/0/1

[RouterB-Serial2/0/1] link-protocol ppp

[RouterB-Serial2/0/1] ppp authentication-mode pap domain system

[RouterB-Serial2/0/1] ppp pap local-user rtb password simple rtb

[RouterB-Serial2/0/1] ppp mp

[RouterB-Serial2/0/1] shutdown

[RouterB-Serial2/0/1] undo shutdown

[RouterB-Serial2/0/1] quit

# Configure the user in the domain to use the local authentication scheme.

[RouterB] domain system

[RouterB-isp-system] authentication ppp local

[RouterB-isp-system] quit

8. Verify the configuration on Router A:

<RouterA> display ppp mp

Template is Virtual-Template1

Bundle rtb, 2 member, Master link is Virtual-Template1:0

0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,

sequence 0/0 rcvd/sent

The bundled member channels are:

Serial2/0/2

Serial2/0/1

9. Verify the configuration on Router B:

[RouterB] display ppp mp

Template is Virtual-Template1

Bundle rta, 2 member, Master link is Virtual-Template1:0

0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,

sequence 0/0 rcvd/sent

The bundled member channels are:

Serial2/0/2

Serial2/0/1

# Display the status of the VA interfaces.

[RouterB] display virtual-access

Virtual-Template1:0 current state : UP

Line protocol current state : UP

Description : Virtual-Template1:0 Interface

The Maximum Transmit Unit is 1500

Link layer protocol is PPP

LCP opened, MP opened, IPCP opened, OSICP opened, MPLSCP opened