R3303-HP HSR6800 Routers Layer 2 - WAN Configuration Guide

70
Ste
p
Command Remarks
8. Set the maximum number of
PPPoE sessions allowed for a
local MAC address.
pppoe-server max-sessions
local-mac number
Optional.
4096 by default.
9. Set the maximum number of
PPPoE sessions allowed on a
card (in standalone mode).
pppoe-server max-sessions slot
slot-number total number
Optional.
10. Set the maximum number of
PPPoE sessions allowed on a
card (in IRF mode).
pppoe-server max-sessions chassis
chassis-number slot slot-number
total number
Optional.
11. Set the upper threshold for the
PPPoE abnormal offline event
count.
pppoe-server
abnormal-offline-count threshold
number
Optional.
65535 by default.
If the PPPoE abnormal offline event
count in the last 5 minutes exceeds
this threshold, the system outputs a
trap message.
12. Set the upper threshold for the
PPPoE abnormal offline event
percentage.
pppoe-server
abnormal-offline-percent threshold
number
Optional.
100 by default.
If the PPPoE abnormal offline event
percentage in the last 5 minutes
exceeds this threshold, the system
outputs a trap message.
13. Set the lower threshold for the
PPPoE normal offline event
percentage.
pppoe-server
normal-offline-percent threshold
number
Optional.
0 by default.
If the PPPoE normal offline event
percentage in the last 5 minutes is
lower than this threshold, the
system outputs a trap message.
14. Configure authentication and
accounting on PPP users.
See Security Configuration Guide.
Optional.
When you configure a static route on a VT interface, specify the next hop instead of the outgoing
interface. If the outgoing interface is required, make sure the physical interface bound to the VT interface
is effective to ensure normal transport of packets.
Displaying and maintaining PPPoE
Task Command Remarks
Display the statistics and state
information for a PPPoE server.
display pppoe-server session all [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Clear PPP sessions on the PPPoE
server.
reset pppoe-server { all | interface
interface-type interface-number |
virtual-template number }
Available in user view