R3303-HP HSR6800 Routers Security Command Reference

86
Parameters
minutes: Real-time accounting interval in minutes. The value can be 0 or a multiple of 3, ranging from 3
to 60.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the RADIUS
accounting server periodically. This command sets the interval.
When the real-time accounting interval on the device is 0, the device sends online user accounting
information to the RADIUS accounting server at the real-time accounting interval configured on the server,
or does not send online user accounting information.
Different real-time accounting intervals impose different performance requirements on the NAS and the
RADIUS server. A shorter interval helps achieve higher accounting precision but requires higher
performance. Use a longer interval when there are a large number of users (1000 or more).
Table 7 Recommended real-time accounting intervals
Number of users
Real-time accountin
g
interval (in minutes)
1 to 99 3
100 to 499 6
500 to 999 12
1000 or more 15 or longer
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting
timer response-timeout (RADIUS scheme view)
Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The RADIUS server response timeout period is 3 seconds.
Views
RADIUS scheme view
Default command level
2: System level