R3303-HP HSR6800 Routers Security Command Reference

108
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
minutes: Real-time accounting interval in minutes. The value can be 0 or a multiple of 3, ranging from 3
to 60. A value of 0 means "Do not send online user accounting information to the HWTACACS server."
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
Consider the performance of the NAS and the HWTACACS server when you set the real-time accounting
interval. A shorter interval requires higher performance. Use a longer interval when there are a large
number of users (more than 1000, inclusive).
Table 9 Recommended real-time accounting intervals
Number of users
Real-time accountin
g
interval (in minutes)
1 to 99 3
100 to 499 6
500 to 999 12
1000 or more 15 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
timer response-timeout (HWTACACS scheme view)
Use timer response-timeout to set the HWTACACS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The HWTACACS server response timeout time is 5 seconds.
Views
HWTACACS scheme view
Default command level
2: System level