R3303-HP HSR6800 Routers Security Command Reference

126
Related commands
display dot1x
dot1x multicast-trigger
Use dot1x multicast-trigger to enable the 802.1X multicast trigger function. The device acts as the
initiator and periodically multicasts Identify EAP-Request packets out of a port to detect 802.1X clients
and trigger authentication.
Use undo dot1x multicast-trigger to disable the function.
Syntax
dot1x multicast-trigger
undo dot1x multicast-trigger
Default
The multicast trigger function is enabled.
Views
Ethernet interface view
Default command level
2: System level
Usage guidelines
You can use the dot1x timer tx-period command to set the interval for sending multicast Identify
EAP-Request packets.
Examples
# Enable the multicast trigger function on interface GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] dot1x multicast-trigger
Related commands
display dot1x
dot1x port-control
Use dot1x port-control to set the authorization state for the specified or all ports.
Use undo dot1x port-control to restore the default.
Syntax
In system view:
dot1x port-control { authorized-force | auto | unauthorized-force } [ interface interface-list ]
undo dot1x port-control [ interface interface-list ]
In Ethernet interface view:
dot1x port-control { authorized-force | auto | unauthorized-force }