R3303-HP HSR6800 Routers Security Command Reference

137
Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
Default
The timer is 30 minutes.
Views
System view
Default command level
2: System level
Parameters
ead-timeout-value: Specifies the EAD rule timer in minutes. The value range is 1 to 1440.
Usage guidelines
EAD fast deployment automatically creates an ACL rule, or EAD rule, to open access to the redirect URL
for each redirected user seeking to access the network. The EAD rule timer sets the lifetime of each ACL
rule. When the timer expires or the user passes authentication, the rule is removed. If users fail to
download EAD client or pass authentication before the timer expires, they must reconnect to the network
to access the free IP.
To prevent ACL rule resources from being used up, you can shorten the timer when the amount of EAD
users is large.
Examples
# Set the EAD rule timer to 5 minutes.
<Sysname> system-view
[Sysname] dot1x timer ead-timeout 5
Related commands
display dot1x
dot1x url
Use dot1x url to configure a redirect URL. When a user uses a Web browser to access networks other
than the free IP, the device redirects the user to the redirect URL.
Use undo dot1x url to remove the redirect URL.
Syntax
dot1x url url-string
undo dot1x url
Default
No redirect URL is defined.
Views
System view