R3303-HP HSR6800 Routers Security Command Reference

187
port-security authorization ignore
Use port-security authorization ignore to configure a port to ignore the authorization information
received from the server (an RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Ethernet interface view
Default command level
2: System level
Usage guidelines
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user's account. For example, it can assign a VLAN.
Examples
# Configure port GigabitEthernet 3/0/1 to ignore the authorization information from the authentication
server.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] port-security authorization ignore
Related commands
display port-security
port-security enable
Use port-security enable to enable port security.
Use undo port-security enable to disable port security.
Syntax
port-security enable
undo port-security enable
Default
Port security is disabled.
Views
System view
Default command level
2: System level