R3303-HP HSR6800 Routers Security Command Reference

237
public-key peer
Use public-key peer to specify a name for the peer public key and enter public key view.
Use undo public-key peer to remove the public key.
Syntax
public-key peer keyname
undo public-key peer keyname
Views
System view
Default command level
2: System level
Parameters
keyname: Specifies a name for the peer public key on the local device, a case-sensitive string of 1 to 64
characters.
Usage guidelines
To configure the peer public key on the local device, obtain the public key in hexadecimal from the peer
device beforehand, and perform the following configurations on the local device:
1. Execute the public-key peer command, and then the public-key-code begin command to enter
public key code view.
2. Type the peer public key.
3. Execute the public-key-code end command to save the public key and return to public key view.
4. Execute the peer-public-key end command to return to system view.
Examples
# Specify the name for the peer public key as key1 and enter public key view.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key]
Related commands
• public-key-code begin
• public-key-code end
• peer-public-key end
• display public-key peer
public-key peer import sshkey
Use public-key peer import sshkey to import a peer host public key from the public key file.
Use undo public-key peer to remove the specified peer host public key.
Syntax
public-key peer keyname import sshkey filename