R3303-HP HSR6800 Routers Security Command Reference

270
tunnel remote address:
transform-set name: prop1
inbound AH setting:
AH spi:
AH string-key:
AH authentication hex key: ******
inbound ESP setting:
ESP spi: 23456 (0x5ba0)
ESP string-key:
ESP encryption hex key: ******
ESP authentication hex key: ******
outbound AH setting:
AH spi:
AH string-key:
AH authentication hex key:
outbound ESP setting:
ESP spi: 23456 (0x5ba0)
ESP string-key:
ESP encryption hex key: ******
ESP authentication hex key: ******
===========================================
IPsec Policy Group: "gdoi-map"
Interface: Ethernet1/1
===========================================
------------------------------------
IPsec policy name: " gdoi-map "
sequence number: 10
mode: gdoi
-------------------------------------
group name :gdoi-group
Table 36 Command output
Field Descri
p
tion
security data flow ACL referenced by the IPsec policy.
acl version Version of the ACL.
Interface Interface to which the IPsec policy is applied.
Protocol
Name of the protocol to which the IPsec policy is applied. (This
field is not displayed when the IPsec policy is not applied to any
routing protocol.)
sequence number Sequence number of the IPsec policy.
mode
Negotiation mode of the IPsec policy:
• manual—Manual mode.
• isakmp—IKE negotiation mode.
• template—IPsec policy template mode.
• gdoi—GDOI mode.