R3303-HP HSR6800 Routers Security Command Reference

288
This command applies only to IKE negotiation mode.
Syntax
ike-peer peer-name
undo ike-peer peer-name
Views
IPsec policy view, IPsec policy template view, IPsec profile view
Default command level
2: System level
Parameters
peer-name: Specifies the IKE peer name, a string of 1 to 32 characters.
Examples
# Configure a reference to an IKE peer in an IPsec policy.
<Sysname> system-view
[Sysname] ipsec policy policy1 10 isakmp
[Sysname-ipsec-policy-isakmp-policy1-10] ike-peer peer1
# Configure a reference to an IKE peer in an IPsec profile.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile- profile1] ike-peer peer1
Related commands
• ipsec policy
• ipsec profile
ipsec anti-replay check
Use ipsec anti-replay check to enable IPsec anti-replay checking.
Use undo ipsec anti-replay check to disable IPsec anti-replay checking.
Syntax
ipsec anti-replay check
undo ipsec anti-replay check
Default
IPsec anti-replay checking is enabled.
Views
System view
Default command level
2: System level
Examples
# Enable IPsec anti-replay checking.
<Sysname> system-view