R3303-HP HSR6800 Routers Security Command Reference

295
ipsec profile (system view)
Use ipsec profile to create an IPsec profile and enter its view. An IPsec profile defines the IPsec transform
sets to be used to protect the data and the IKE negotiation parameters used to set up the SAs.
Use undo ipsec profile to delete an IPsec profile.
Syntax
ipsec profile profile-name
undo ipsec profile profile-name
Default
No IPsec profile exists.
Views
System view
Default command level
2: System level
Parameters
profile-name: Specifies the name for the IPsec profile, a case-insensitive string of 1 to 15 characters.
Usage guidelines
IPsec profiles can be applied to only DVPN interfaces and IPsec tunnel interfaces.
Examples
# Create IPsec profile profile1 and enter its view.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile-profile1]
Related commands
• ipsec profile (tunnel interface view)
• display ipsec profile
ipsec profile (tunnel interface view)
Use ipsec profile to apply an IPsec profile to a DVPN tunnel interface or an IPsec tunnel interface.
Use undo ipsec profile to remove the application.
Syntax
ipsec profile profile-name
undo ipsec profile
Default
No IPsec profile is applied to a DVPN tunnel interface or an IPsec tunnel interface, and no IPsec
protection is provided.
Views
Tunnel interface view