R3303-HP HSR6800 Routers Security Command Reference

299

policy enable

Use policy enable to enable the IPsec policy.

Use undo policy enable to disable the IPsec policy.

Syntax

policy enable

undo policy enable

Default

The IPsec policy is enabled.

Views

IPsec policy view, IPsec policy template view

Default command level

2: System level

Usage guidelines

The command is not applicable to manual IPsec policies.

If the IPsec policy is not enabled for the IKE peer, the peer cannot take part in the IKE negotiation.

Examples

# Enable the IPsec policy with the name policy1 and sequence number 100.

<Sysname> system-view

[Sysname] ipsec policy policy1 100 isakmp

[Sysname-ipsec-policy-isakmp-policy1-100] policy enable

Related commands

• ipsec policy (system view)

• ipsec policy-template

qos pre-classify

Use qos pre-classify to enable packet information pre-extraction.

Use undo qos pre-classify to restore the default.